A superb leaded solder paste. Sn63/Pb37 eutectic formula goes directly from a liquid to solid state as it cools and vise-versa. Great for reballing BGA chips with stencils, soldering connectors, and more!
Suitable for mobile phone repair, computer and digital service industries, high-precision circuit board SMT soldering, BGA welding process, etc.Features
Flux: IPX3Alloy: Sn63 Pb37Lead solder paste, melting point, 183℃Microns/Granularity :3 (um)Strong viscosity; fine particles; fine pasteExcellent wettability: the surface after being opened for a long timeIt is still wet and does not affect weldingResistant to medium temperature, less residue, strong upper tin, bright soldering spotWorking temperature: 200 (℃)
Cleans soldering welding iron tips without water, better than conventional sponges. It doesn't need water so that will not reduce the tip's temperature
Your solder iron tip will be cleaned cleaner and faster
When you clean your soldering iron tip, there won't have tin residual out the container, which will keep your workbench cleaning
Smokeless, tasteless, non-toxic and saves the energy
Air gun on the shelf can be rotated 360 for easy operation.
Height can be adjusted within the range of scientific design, easy operation.
Circuit boards with arbitrarily placed in the bottom range
Use metal chassis, sturdy.
Quality soldering iron stand with tip cleaning sponge
Inner barrel holds the iron securely and outer coil helps to protect your hand from accidental contact
Sponge is removable and replaceable
Quality soldering iron stand
Inner barrel holds the iron securely and outer coil helps to protect your hand from accidental contact
Space for sponge is removable and replaceable
Arctic Tiger AT-2015 Desoldering Wick is 2mm wide & 1.5 meter long. This tin absorbing wire is made of pure copper and chemicals, with strong tin absorbing ability. A good spool of solder wick can save you a lot of time. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion, has good thermal conductivity and tinning effect, and can absorb tin cleanly.In desoldering, after the chip is removed, there will still be a large amount of solder on the circuit board, which will affect the soldering of the chip.Usually use tin suction tape to clean. The method is to put the soldering iron on the tin suction tape and then move it slowly on the chip pad. When the solder melts, it will be sucked up by the tin suction tape, and the tin between the feet will be sucked, so the cleaning is easy. The printing plate is clean. Afterwards, wash the position of the chip on the board with board washing water. Solder strips can be used for larger patch components! In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin absorber can be used for relatively large SMD components. No-cleaning, cut off the sucked section after each use and reuse it.Note: In order to avoid burns, please hold the shell or use tweezers and other tools to grasp it, please do not directly touch the tin suction line during use.The use of desoldering braids significantly reduce rework/repair time and minimize the risk of heat damage It is a Type R flux braid that is fast, safe, noncorrosive, and leaves no ionic contamination. This braid is noncorrosive, halide-free, and organic. Our design allows maximum solder capacity and optimizes heat transfer. Braids leave little or no flux residue, shortening or completely eliminating cleaning time.
Arctic Tiger AT-3515 Desoldering Wick is 3.5mm wide & 1.5 meter long. This tin absorbing wire is made of pure copper and chemicals, with strong tin absorbing ability. A good spool of solder wick can save you a lot of time. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion, has good thermal conductivity and tinning effect, and can absorb tin cleanly.In desoldering, after the chip is removed, there will still be a large amount of solder on the circuit board, which will affect the soldering of the chip.Usually use tin suction tape to clean. The method is to put the soldering iron on the tin suction tape and then move it slowly on the chip pad. When the solder melts, it will be sucked up by the tin suction tape, and the tin between the feet will be sucked, so the cleaning is easy. The printing plate is clean. Afterwards, wash the position of the chip on the board with board washing water. Solder strips can be used for larger patch components! In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin absorber can be used for relatively large SMD components. No-cleaning, cut off the sucked section after each use and reuse it.Note: In order to avoid burns, please hold the shell or use tweezers and other tools to grasp it, please do not directly touch the tin suction line during use.The use of desoldering braids significantly reduce rework/repair time and minimize the risk of heat damage It is a Type R flux braid that is fast, safe, noncorrosive, and leaves no ionic contamination. This braid is noncorrosive, halide-free, and organic. Our design allows maximum solder capacity and optimizes heat transfer. Braids leave little or no flux residue, shortening or completely eliminating cleaning time.
Arctic Tiger AT-3015 Desoldering Wick is 3mm wide & 1.5 meter long. This tin absorbing wire is made of pure copper and chemicals, with strong tin absorbing ability. A good spool of solder wick can save you a lot of time. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion, has good thermal conductivity and tinning effect, and can absorb tin cleanly.In desoldering, after the chip is removed, there will still be a large amount of solder on the circuit board, which will affect the soldering of the chip.Usually use tin suction tape to clean. The method is to put the soldering iron on the tin suction tape and then move it slowly on the chip pad. When the solder melts, it will be sucked up by the tin suction tape, and the tin between the feet will be sucked, so the cleaning is easy. The printing plate is clean. Afterwards, wash the position of the chip on the board with board washing water. Solder strips can be used for larger patch components! In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin absorber can be used for relatively large SMD components. No-cleaning, cut off the sucked section after each use and reuse it.Note: In order to avoid burns, please hold the shell or use tweezers and other tools to grasp it, please do not directly touch the tin suction line during use.The use of desoldering braids significantly reduce rework/repair time and minimize the risk of heat damage It is a Type R flux braid that is fast, safe, noncorrosive, and leaves no ionic contamination. This braid is noncorrosive, halide-free, and organic. Our design allows maximum solder capacity and optimizes heat transfer. Braids leave little or no flux residue, shortening or completely eliminating cleaning time.
Arctic Tiger AT-1515 Desoldering Wick is 1.5mm wide & 1.5 meter long. This tin absorbing wire is made of pure copper and chemicals, with strong tin absorbing ability. A good spool of solder wick can save you a lot of time. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion, has good thermal conductivity and tinning effect, and can absorb tin cleanly.In desoldering, after the chip is removed, there will still be a large amount of solder on the circuit board, which will affect the soldering of the chip.Usually use tin suction tape to clean. The method is to put the soldering iron on the tin suction tape and then move it slowly on the chip pad. When the solder melts, it will be sucked up by the tin suction tape, and the tin between the feet will be sucked, so the cleaning is easy. The printing plate is clean. Afterwards, wash the position of the chip on the board with board washing water. Solder strips can be used for larger patch components! In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin absorber can be used for relatively large SMD components. No-cleaning, cut off the sucked section after each use and reuse it.Note: In order to avoid burns, please hold the shell or use tweezers and other tools to grasp it, please do not directly touch the tin suction line during use.The use of desoldering braids significantly reduce rework/repair time and minimize the risk of heat damage It is a Type R flux braid that is fast, safe, noncorrosive, and leaves no ionic contamination. This braid is noncorrosive, halide-free, and organic. Our design allows maximum solder capacity and optimizes heat transfer. Braids leave little or no flux residue, shortening or completely eliminating cleaning time.
Arctic Tiger AT-2515 Desoldering Wick is 2.5mm wide & 1.5 meter long. This tin absorbing wire is made of pure copper and chemicals, with strong tin absorbing ability. A good spool of solder wick can save you a lot of time. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion, has good thermal conductivity and tinning effect, and can absorb tin cleanly.In desoldering, after the chip is removed, there will still be a large amount of solder on the circuit board, which will affect the soldering of the chip.Usually use tin suction tape to clean. The method is to put the soldering iron on the tin suction tape and then move it slowly on the chip pad. When the solder melts, it will be sucked up by the tin suction tape, and the tin between the feet will be sucked, so the cleaning is easy. The printing plate is clean. Afterwards, wash the position of the chip on the board with board washing water. Solder strips can be used for larger patch components! In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin absorber can be used for relatively large SMD components. No-cleaning, cut off the sucked section after each use and reuse it.Note: In order to avoid burns, please hold the shell or use tweezers and other tools to grasp it, please do not directly touch the tin suction line during use.The use of desoldering braids significantly reduce rework/repair time and minimize the risk of heat damage It is a Type R flux braid that is fast, safe, noncorrosive, and leaves no ionic contamination. This braid is noncorrosive, halide-free, and organic. Our design allows maximum solder capacity and optimizes heat transfer. Braids leave little or no flux residue, shortening or completely eliminating cleaning time.
JASTON JSD-9001X is small pack solder wire with rosin core is small volume, which is easy for small repair works. It is a mini Leaded & Rosin Flux solder wire Sn63/Pb37 reel. It is best choice for repairing of sophisticated equipment's such as mobile phone motherboard gives fast welding speed, less spatter, bright solder joints, and adapts to the rapid development of the modern electronics industry and the needs of welding technology. It is a good material for the maintenance industry and electronics enthusiasts.Specification
Diameter 0.8mm
Gross Weight 9 gram (mini)
Tin(Sn) 63%, Lead(Pb) 37%
Expansion 75%
Flux 1.0%-3.0% (Flux with Rosin)
Features
Melting point with lead: 183-200°C, Leaded working temperature: 300-350°C
Excellent Tin wire for motherboards & Mobile phones repair works
High tin content, plump solder joints and good soldering ability
Contains rosin with low melting point, continuous core
Raw materials are used, in strict accordance with the requirements of GB3131-82
Suitable for the majority of maintenance masters
MXJ-8003 is Leaded & Rosin Flux solder wire Sn63/Pb37. This Leaded solder wire is available in various diameter size, It is best choice for repairing of sophisticated equipment's such as mobile phone motherboard gives fast welding speed, less spatter, bright solder joints, and adapts to the rapid development of the modern electronics industry and the needs of welding technology. It is a good material for the maintenance industry and electronics enthusiasts.Specification
Diameter Size available to choose 0.3 / 0.5 / 0.6 / 0.8 / 1.0mm
Gross Weight 100g
Tin(Sn) 63%, Lead(Pb) 37%
Expansion 75%
Flux 1.0%-3.0% (Flux with Rosin)
Features
Melting point with lead: 183-200°C, Leaded working temperature: 300-350°C
Excellent Tin wire for motherboards & Mobile phones repair works
High tin content, plump solder joints and good soldering ability
Contains rosin with low melting point, continuous core
Raw materials are used, in strict accordance with the requirements of GB3131-82
Suitable for the majority of maintenance masters
Note: Please choose the right size for your requirement before placing your order.
MXJ-8001 is Leaded & Rosin Flux solder wire Sn63/Pb37. This Leaded solder wire is available in various diameter size, It is best choice for repairing of sophisticated equipment's such as mobile phone motherboard gives fast welding speed, less spatter, bright solder joints, and adapts to the rapid development of the modern electronics industry and the needs of welding technology. It is a good material for the maintenance industry and electronics enthusiasts.Specification
Diameter Size available to choose 0.3 / 0.5 / 0.6 / 0.8 / 1.0mm
Gross Weight 50g
Tin(Sn) 63%, Lead(Pb) 37%
Expansion 75%
Flux 1.0%-3.0% (Flux with Rosin)
Features
Melting point with lead: 183-200°C, Leaded working temperature: 300-350°C
Excellent Tin wire for motherboards & Mobile phones repair works
High tin content, plump solder joints and good soldering ability
Contains rosin with low melting point, continuous core
Raw materials are used, in strict accordance with the requirements of GB3131-82
Suitable for the majority of maintenance masters
Note: Please choose the right size for your requirement before placing your order.
JASTON JSD-9003 is high purity disposable active solder wire. This Leaded solder wire Sn63/Pb37 is available in various diameter size, It is best choice for repairing of sophisticated equipment's such as mobile phone motherboard gives fast welding speed, less spatter, bright solder joints, and adapts to the rapid development of the modern electronics industry and the needs of welding technology. It is a good material for the maintenance industry and electronics enthusiasts.Specification
Diameter Size available to choose 0.3 / 0.5 / 0.6 / 0.8 / 1.0mm
Gross Weight 50g
Tin/Lead Content Ratio: 63/37
Expansion 75%
Flux 1.0%-3.0% (Flux with Rosin)
Features
Melting point with lead: 183-200°C, Leaded working temperature: 300-350°C
Excellent Tin wire for motherboards & Mobile phones repair works
High tin content, plump solder joints and good soldering ability
Contains rosin with low melting point, continuous core
Raw materials are used, in strict accordance with the requirements of GB3131-82
Suitable for the majority of maintenance masters
Note: Please choose the right size for your requirement before placing your order.
Mechanic TY-V866 Special Purpose Series gives fast welding speed, less spatter, bright solder joints, and adapts to the rapid development of the modern electronics industry and the needs of welding technology. It is a good material for the maintenance industry and electronics enthusiasts. Specification
Size available to choose 0.3 / 0.4 / 0.5 / 0.6mm
Gross Weight 40g
Tin/Lead Content Ratio: 63/37
CJ(Flux) 0.05%, Expansion 75%
Flux 1.0%-3.0%
Features
Excellent Tin wire for motherboards & Mobile phones repair works
High tin content, plump solder joints and good soldering ability
Contains rosin with low melting point, continuous core
Raw materials are used, in strict accordance with the requirements of GB3131-82
Suitable for the majority of maintenance masters
Note: Please choose the right size for your requirement before placing your order.
This ARCTIC TIGER Precision Tweezers set includes anti-static, Fine straight and curved tip set made of stainless steel and is excellent choice for various type of jobs such as Mobile Phones, Watches and other precision repair works. Includes:
AT-10D Anti Static
AT-11D Extremely fine and sharp tip
AT-12D Fine tip straight
AR-13D Super Fint tip straight
AR-14D Super Fint tip straight
AR-15D Fine tip curved
This digital compass is specially designed for outdoor use, and the buckle design can be used to buckle the product on a belt or backpack, which is convenient for carrying in various outdoor activities.
This product is based on azimuth sensing electronic technology, digital clock, digital thermometer and digital compass full-screen digital display, backlight, no matter at any angle, you can clearly see the readings on the LCD screen.
Functions:
Digital Electronic compass (accuracy: +/-3degree; resolution: +/-1degree)
Digital Thermometer (C or F user option)
Digital Clock (with hour, minute, second)
Backlight LCD (Blue)
Security clip for attaching to belt and rucksack etc
Tuning1. Put the battery into the product and display the full screen for 2 seconds, then the word 'CAL' will appear on the display screen and sixteen N characters will flash on the periphery, indicating the calibration status. 2. At this time, press the COMPASS button to display a direction degree, which is inaccurate, then press and hold the COMPASS button for about 4 seconds, CAL and 16 flashing N characters appear again , then put this digital compass on a flat surface with its face up, and then rotate this compass for a circle ( you can also put the compass on a hand flat surface, rotate your body week ) . This allows the product's electronic bearing sensor to find true north. (Note: During the adjustment process, the bubble of the level should be kept in the circle, so that the adjustment result will be more accurate)3. After one rotation, press the COMPASS button, and the correct direction will appear at this time, and the adjustment process is completed. Note: The adjustment process should be completed within one minute, otherwise the status of the compass will be expired. If this process is not completed within one minute, repeat the 2 steps to re-adjust.Temperature stateTemperature status display: Celsius temperature and Fahrenheit temperaturePress the [MODE] button to enter the time / temperature state, and the display will display Celsius temperature ( 0 C) by default , press the [SELECT] button to switch the display state of Fahrenheit temperature ( 0 F) and Celsius temperature ( 0 C) .Time settingTime status display: 24 hoursIn the time state (for example, in the compass state, you can press the [MODE] button to enter the time state), press the [SET] button for 3 seconds, the hour number will flash, press the [SELECT] button to set the hour value.Press the [SET] button and the minute number will flash, press the [SELECT] button to set the minute value.Long press the [SET] button for 3 seconds to confirm the above time setting.Compass statusIn the time state, press the [Compass] button to use the compass function.The device only stays in the compass state for 3 minutes. After 3 minutes, it will automatically sleep (that is, nothing is displayed on the screen). If you don't need to use the compass state for such a long time, then press the [MODE] button to switch back to the clock temperature state, which can save power consumption. After entering the compass state, the position of the N icon on the periphery of the LCD screen is the true north.If heavy fall or other irregular operations during use may cause the status of the compass to be destroyed and the data to be inaccurate, you can press and hold the [ Compass] button and follow the adjustment step 2 to re-adjust.
Excellent Plastic Paper Holder Stand with Adjustable Clip and Line Guide for Reading Typing, Best Desktop Stand for A4 Legal Size Documents Copyholder Multiple Viewing Positions
Model: 753
Perfect for Work Along Side Computers & Laptops
Helps in Typing and Editing Stock Systems and Merchandising
Clip for Data Sheets
Two Clamps for Catalogues & Books
With Dual Lines Transparent Ruler
Adjustable Tilt with Seven Positions
Excellent Paper Holder Stand (Metal) with Adjustable Clip and Line Guide for Reading Typing, Best Desktop Stand for A4 Legal Size Documents Paper holder Multiple Viewing Positions
Model: 752
Perfect for Work Along Side Computers & Laptops
Helps in Typing and Editing Stock Systems and Merchandising
Clip for Data Sheets
Two Clamps for Catalogues & Books
With Dual Lines Transparent Ruler
Adjustable Tilt with Seven Positions
An amazing and creative gift idea as well as for personal use if you face decision making problems. When you feel bored, tired from work or feel too much pressure, you can look at the magnetic swing ball on the desktop and watch it swing back and forth quietly to relieve stress and relax your brain. It is undoubtedly a perfect gift for your children or friends, it can not only decorate the space, but also add fun to life, stimulate children's interest in learning, and bring entertainment to friends when they gather.
The magnetic decision ball works by magnetism (no battery required),
Pick up the ball and release it, then the ball will swing like a pendulum and stop on an answer
This cool adult desk toy will be a great icebreaker.
This product is a clean soldering iron tip product that does not contain acid. It effectively eliminates the problems of easy to break, easy black, and no tin caused by acid corrosion of the soldering iron tip; the cleaning effect is excellent, and there is no benzene-containing co-derivative.
Features:
Can remove oxides on the soldering tip;
The nozzle can be returned to light and re-tinned;
Does not contain diammonium phosphate, flux residue, will not damage the board.
Weight: Approx. 36g
Usage: Soldering iron head cleaning
Packing: 1 x Soldering Iron Tip Refresher Clean Paste
AT-6X Electric Solder Tip Regeneration Paste Tin Solder Tip Oxidation Repair Paste
All aspects of soldering iron head cleaning
Fast repair, cleaning the soldering iron head blackening oxidation problems
Product Name: Cream Resurrection Head Soldering Iron
Capacity: 16g
Tip Refresher cleaning cream for solder iron tip head resurrection
When the tip surface starts to oxidize during operation, it becomes dark and does not wet properly
To improve work efficiency, you need this Tip Refresher
Wipe off the black oxide on the surface of soldering iron tips
Make the soldering tip looks like new one again
Easy to use
