Tools

ARCTIC TIGER white lubricating grease is best choice for computer and notebook fans, Mechanical printers, gear bearings, mechanical keyboard and other items requires flow free lubrication and for noise reduction. Also suitable for small Gears..etc  It reduces noise, gives lubrication and prevent rust. Features: White , odorless, not easy to dry, not easy to flow, can prevent rust. Stable , waterproof, high and low temperature resistance, smooth lubrication. It can reduce the friction and friction noise between parts and increase the smoothness of movement. Compared with oil products, grease is not easy to coagulate, not easy to flow, longer use for . Suitable for notebook fans, gear bearings, mechanical keyboard and other items of lubrication, noise reduction.

Read more less

The Arctic Tiger AT-200X is a lead-free BGA solder paste that is perfect for mobile phone repair. It is made with a solder oil alloy that has a melting point of 180 degrees Celsius. The solder paste is also compatible with a wide range of electronic components. The product is widely used in electronic products PCB, BGA, CSP and other packages for repairing, welding, and rework areas. Low halogen content, in line with the industry standards, has ability to quickly remove the oxide layer on the metal surface. it has less welding residue and is a no clean product. Key Features: Lead-free, No-clean, Rosin flux, High transfer efficiency, Good liquidity Bright solder joints, Little smoke Applications: Mobile phone repair PCB, BGA, CSP and other packages CSP rework Other electronic assembly applications Why Choose Arctic Tiger AT-200X Solder Paste? The Arctic Tiger AT-200X is a high-quality solder paste that is made with lead-free materials, making it environmentally friendly. It is a no-clean solder paste, which means that there is no need to clean the PCB after soldering. This makes it more environmentally friendly and saves time and money. The Arctic Tiger AT-200X uses rosin flux, which is safe for the environment. The solder paste has a high transfer efficiency, meaning that more solder is transferred to the PCB, resulting in better solder joints. The solder paste has good liquidity, making it easy to apply. The solder joints are bright and have little smoke, making them aesthetically pleasing and safe to work with. The Arctic Tiger AT-200X is compatible with a wide range of electronic components, making it a versatile solder paste that can be used for a variety of applications.

Read more less

Arctic tiger mobile phone motherboard repair jig circuit board welding fixed fixture circuit board positioning bracket with slot. Its thickened mobile phone motherboard repair jig, with chip ball planting slotInstructions for use:1. Use three movable nozzles to select the card position on the circuit board2. Adjust the width and strength of the movable jaw3. When installing the circuit board, one side of the circuit board should be put into the clamping mouth with spring first, push back and then put the other side of the circuit board into the movable clamping block, and then it can work.

Read more less

Cleans soldering iron tips without water, better than conventional sponges.

Read more less

Arctic Tiger AT-2015 Desoldering Wick is 2mm wide & 1.5 meter long. This tin absorbing wire is made of pure copper and chemicals, with strong tin absorbing ability. A good spool of solder wick can save you a lot of time. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion, has good thermal conductivity and tinning effect, and can absorb tin cleanly.In desoldering, after the chip is removed, there will still be a large amount of solder on the circuit board, which will affect the soldering of the chip.Usually use tin suction tape to clean. The method is to put the soldering iron on the tin suction tape and then move it slowly on the chip pad. When the solder melts, it will be sucked up by the tin suction tape, and the tin between the feet will be sucked, so the cleaning is easy. The printing plate is clean. Afterwards, wash the position of the chip on the board with board washing water. Solder strips can be used for larger patch components! In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin absorber can be used for relatively large SMD components. No-cleaning, cut off the sucked section after each use and reuse it.Note: In order to avoid burns, please hold the shell or use tweezers and other tools to grasp it, please do not directly touch the tin suction line during use.The use of desoldering braids significantly reduce rework/repair time and minimize the risk of heat damage It is a Type R flux braid that is fast, safe, noncorrosive, and leaves no ionic contamination. This braid is noncorrosive, halide-free, and organic. Our design allows maximum solder capacity and optimizes heat transfer. Braids leave little or no flux residue, shortening or completely eliminating cleaning time.

Read more less

Arctic Tiger AT-3515 Desoldering Wick is 3.5mm wide & 1.5 meter long. This tin absorbing wire is made of pure copper and chemicals, with strong tin absorbing ability. A good spool of solder wick can save you a lot of time. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion, has good thermal conductivity and tinning effect, and can absorb tin cleanly.In desoldering, after the chip is removed, there will still be a large amount of solder on the circuit board, which will affect the soldering of the chip.Usually use tin suction tape to clean. The method is to put the soldering iron on the tin suction tape and then move it slowly on the chip pad. When the solder melts, it will be sucked up by the tin suction tape, and the tin between the feet will be sucked, so the cleaning is easy. The printing plate is clean. Afterwards, wash the position of the chip on the board with board washing water. Solder strips can be used for larger patch components! In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin absorber can be used for relatively large SMD components. No-cleaning, cut off the sucked section after each use and reuse it.Note: In order to avoid burns, please hold the shell or use tweezers and other tools to grasp it, please do not directly touch the tin suction line during use.The use of desoldering braids significantly reduce rework/repair time and minimize the risk of heat damage It is a Type R flux braid that is fast, safe, noncorrosive, and leaves no ionic contamination. This braid is noncorrosive, halide-free, and organic. Our design allows maximum solder capacity and optimizes heat transfer. Braids leave little or no flux residue, shortening or completely eliminating cleaning time.

Read more less

Arctic Tiger AT-2515 Desoldering Wick is 2.5mm wide & 1.5 meter long. This tin absorbing wire is made of pure copper and chemicals, with strong tin absorbing ability. A good spool of solder wick can save you a lot of time. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion, has good thermal conductivity and tinning effect, and can absorb tin cleanly.In desoldering, after the chip is removed, there will still be a large amount of solder on the circuit board, which will affect the soldering of the chip.Usually use tin suction tape to clean. The method is to put the soldering iron on the tin suction tape and then move it slowly on the chip pad. When the solder melts, it will be sucked up by the tin suction tape, and the tin between the feet will be sucked, so the cleaning is easy. The printing plate is clean. Afterwards, wash the position of the chip on the board with board washing water. Solder strips can be used for larger patch components! In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin absorber can be used for relatively large SMD components. No-cleaning, cut off the sucked section after each use and reuse it.Note: In order to avoid burns, please hold the shell or use tweezers and other tools to grasp it, please do not directly touch the tin suction line during use.The use of desoldering braids significantly reduce rework/repair time and minimize the risk of heat damage It is a Type R flux braid that is fast, safe, noncorrosive, and leaves no ionic contamination. This braid is noncorrosive, halide-free, and organic. Our design allows maximum solder capacity and optimizes heat transfer. Braids leave little or no flux residue, shortening or completely eliminating cleaning time.

Read more less

This ARCTIC TIGER Precision Tweezers set includes anti-static, Fine straight and curved tip set made of stainless steel and is excellent choice for various type of jobs such as Mobile Phones, Watches and other precision repair works. Includes: AT-10D Anti Static AT-11D Extremely fine and sharp tip AT-12D Fine tip straight AR-13D Super Fint tip straight AR-14D Super Fint tip straight AR-15D Fine tip curved

Read more less